A water heater is a device that increases the temperature of the water. Despite its obvious usefulness, the device can scare off an ordinary user with its size. Trying to avoid the hassle. It is good to trust the installation of the hot water heater to experienced plumbers, although this task can be done with your own hands. Hot water Installation experts in Sutherland Shire will come to your aid with excellent plumbing services.
Types of water heaters
Heat pump water heaters that are compact, equipped with a heating element. The temperature of the water rises rapidly as it passes through the heat exchanger. The main differences from the storage one are the high load on the power grid, low power, and the absence of a flask for permanent storage of water.
Conventional storage water heaters in St George provide a ready reservoir (storage tank) of hot water. Large capacity (up to 1000 litres) and water constantly circulating the heat exchangers.
Installation of a water heater
It is necessary to determine the distance between the boiler, the socket, and the water pipes.
The hot water tap should be located as close as possible to the heater. This will maintain stable water heating and minimize heat loss;
Free about 0.5 m on each side of the water heater. This will significantly simplify interaction with the device, provide trouble-free technical and warranty service;
Make sure the wall on which you intend to position the heater can support its weight. Reinforce the structure if required;
Make holes in the wall for fasteners. Be aware of the pipes, wires, and ducts inside, do not touch them. Once the hooks are securely installed, attach the water heater body to them.
Selecting a place for installing hot water heater
Water heaters available in St George must be installed in a place that is as protected as possible from water freezing and located near the taps. In this case, you should try to use water pipes of the minimum required length. If the taps are located at a reasonable distance from each other, it is advisable to provide for the installation of several water heaters.
Consider the ease of access
When choosing a place for installing hot water heater, it is necessary to consider the ease of access and proximity to the hot and cold water fittings.
Also, at the installation place of the water heater, there must be enough space for maintenance and dismantling when replacing the water heater. In humid rooms, household appliances can be installed in certain areas.
Consider the strength of the wall.
When choosing an installation place, you also need to consider the strength of the wall. The strength of the wall for the installation of a storage water heater and how well it is fixed are the most important aspects of the installation. A water heater that falls off the wall can cause many problems for both the owner and the neighbours living under it. If the walls are not strong enough, it might cause problems.
Water heater installation must be done by certified people who understand what should be done. Besides, ensure that you find the right hot water heater supplier in St George to ensure that you get quality equipment.
Comments